模载联合支援站

引用框:

-说明：
-悬挂、驾驶室、变速器、刹车、空气座椅、机舱内摄像头的真实物理。
-支持所有默认拖车，以及Camaz.6460、Scania‘s、雷诺积分、Renot、Scania.114、三菱FusoSuperGreat V。

-第2.4节的改动：
-改变机舱的行为。
-我改变了重量，后车轴的航向。
-它改变了刹车，强度，平衡。
-发动机，箱体：转弯，牵引，换挡，引出真正的指标，及时加速到100公里/小时
在实际中(见视频)，最高时速130 km/h，所以在低功率发动机上不缺，而且功能强大。
在中等发动机上测试(淤泥)每秒520-540升，换档随吞咽转速清除，
加速度平稳，重量适中，货物都能感受到载荷。我试过所有的盒子和引擎：阿克普，顺序，手动，
所有类型在超频方面的表现都不同，例如，12-acpp-130 km/h，6秒-121 km/h(空)。货物20t(-)
在你加速的地方，时速可达110公里。在视频中，我记录了加速度和无加速度。
-阻尼是纵向的，横向的(蓄积)。
-在“稳定颤栗”的背景下，以右结尾(建议)。
-P.S.文件被锁定，除了底盘，当添加和编辑底盘时，当保存时，它将要求密码，只需按OK。
...
-对于那些不喜欢改变管理的人，在档案中
第二个文件具有标准控件。
...

-1.30.x版测试

作者：~Tok~

-安装：

-放入Mod文件夹，将其连接。
-在修改后的轨道上放置。

複製內容到剪貼板

原始碼:

– Description:

– Realistic physics of suspension, cab, transmission, brakes, air seat, cameras in the cabin.

– Supports all default trailers, as well as Camaz.6460, Scania rs, Renault integral, Renot, Scania.114, Mitsubishi FusoSuper Great V.



-Changes in v2.4:

-Change the behavior of the cabin.

– I changed the weighting, the course of the rear axles.

-It has changed brakes, intensity, balance.

-The engine, the box: Turns, traction, transfer led to real indicators, Acceleration in time to 100km / h made as

in real (see video), max speed 130 km / h, so that with low-power engines there was no shortage, and with powerful

bust, test (silt) on medium engines 520-540 liters per second, gear shift clear with swallowing revs,

acceleration is smooth and tyagovity, load is felt with cargo. I tried all the boxes and engines: Akpp, sequential, manual,

all types behave differently in terms of overclocking, for example, at 12-acpp-130 km / h, and on 6-second-121 km / h (empty). With cargo 20t (+ -)

up to 110km h a little where you will accelerate. On the video, I recorded the acceleration with and without.

-Dampening is longitudinal, transverse (build-up).

-In the settings “Stabilization of the Thriller” to the end in the right (recommended).

-P.S. Files are locked, except for the chassis, when adding and editing the chassis, when saving, it will ask for the password, just press ok.

_________________________________________________________________

– For those who are not fond of changes in management, in the archive

there is a second file with standard control

(Physics_of_the_truck_V2.4_standard_control_from_ ~ Tok ~).



– Test on version 1.30.x



– Author: ~ Tok ~



– Installation:



– Put in the Mod folder, connect it to the mod manager.

– Put above the modified tracks.



– Keep the original links! Respect author’s work!