[教程] PBS键盘快捷键

 引用框:

All these keyboard shortucts are subject to change.

Tip: most shortcuts also work on Android, if you have a keyboard! Or when using Android installed directly on PC or notebook. I don't know if it will work with emulators. To control the bus using keyboard input, please select Keyboard at the controls list, otherwise it will won't move (default is tilt).

Scroll wheel = internal camera zoom
Ctrl or Alt or Shift = enable clicking on buttons

Alt = Menu (PC only)
Esc = Pause
F1 = Cameras
F2 = Look to left (internal cam)
F3 = Look to right (internal cam)
F4 = Extras, some controls etc
C = Buttons camera cycle, one by one (to click without pressing Ctrl / Shift / Alt)
Ctrl/Shift/Alt + 1/2/3/etc (not on Keypad): buttons cameras, one for each position
F5/F6/F7/F8 ou Num / * - = Right doors
Use SHIFT + F5/F6/F7/F8 ou Num / * - to left doors, or even better...
F9/F10/F11/F12 to left doors
Space = Reset internal camera position (after looking to mirrors...)
Ctrl/Shift/Alt + Space = Hide controls (touch/click anywhere on the screen, if you have selected another menu item before... Because space will activate it again... This will change later)
Backspace = Enable/disable the controls selection screen
Home/End = change destination display (up/down)
Y = Show FPS
E = Turn the bus on/off
L = Low beams
F = High beams
N = Neutral
R = Reverse
M = Automatic Drive
WASD or arrows: control the bus
. = handbrake
Num 7 = Left blinker
Num 9 = Right blinker
Num , = Turn off blinkers
B = Emergency blinkers
H = horn
7, 8 e 9 = internal lights
Numeric Keypad control: Num 4 = left, Num 6 = right, Num 2 = brake, Num 8 = accel, Num + = accel more, Num 5 = center steering wheel
Mouse control = moving top/bottom accelerates or brakes; moving to left/right steers.
Keyboard + mouse control: W/S or up/down arrows accelerates or brakes, and mouse steers.
P = Take screenshot (it will be saved at C:\Users\YOURNAME\AppData\LocalLow\Via Mep\Proton Bus Simulator\screenshots)
U = Time and climate settings (only with Experimental features active)
V = air conditioning (press and hold V while type 1 to turn it on/off, 5 or 6 to up/down desired temperature, and 9 to control vent speed).
I = free camera (PC only). Use WASD + mouse to move; shift to run; ctrl to go slowly; right click anywhere on the screen to release the camera from bus: you may drive and watch yourself as a pedestrian! It is recommended using parking brake, so bus won't move while pressing WASD when using keyboard control.
Q = Wipers

X = waiting...
G = waiting...
J = waiting...

MANUAL GEARBOX:
1 2 3 4 5 6 = gears
N = neutral
R = reverse
Page Up / Page Down = gear up/down
Tab ou Ctrl = clutch
M = turn engine on (hold)
Ctrl + M = turn engine off (hold)
Space = extra brake
Z = Status messages about the vehicle system

==== HOW TO CHANGE SHORTCUTS ====

From version 104+, you may change your controls in the Input tab at the first screen.

Each entry may have two shortcuts: primary and secondary. Both will work for the same command, so you can use the easiest or closest to your hand at a given time. You may use one for keyboard and another for a joystick, for example.

Scroll that screen to find the desired item and double-click it in the area corresponding to primary or secondary key. Then press the desired key. Warning: there is no undo: if you need, enter the old key again to restore it.

Be careful to not reuse the same key for two different functions. If you allow this, both things will occur at the same time (for example, opening a door and changing the camera).

If you need to reset defaults, you may remove the preferences related to Input in your user's profile.

On Windows it will be in registry:

HKEY_CURRENT_USER\Software\Via Mep\Proton Bus Simulator

On Linux, it may be in this place:

~/.config/unity3d/Via Mep/Proton Bus Simulator

And on Mac:

~/Library/Preferences/unity.Via Mep.Proton Bus Simulator.plist

If you delete the entire preferences file or registry, you'll reset all settings in game.

On Windows it will be in registry:

HKEY_CURRENT_USER\Software\Via Mep\Proton Bus Simulator

On Linux, it may be in this place:

~/.config/unity3d/Via Mep/Proton Bus Simulator

And on Mac:

~/Library/Preferences/unity.Via Mep.Proton Bus Simulator.plist

If you delete the entire preferences file or registry, you'll reset all settings in game.