【版本】：1.30
【介绍】：
複製內容到剪貼板
原始碼:
The purpose of this mod is to approximate the real-world off-idle torque behaviour of the class 8 turbodiesels used in these trucks.
With this mod you’ll find you won’t be needing to use the accelerator on a standing start from the lower gears under ‘most’ circumstances, excepting extreme loads and inclines.
On a level surface with gross loads approaching 80,000lbs and using the 18 speed box, you’ll likely be able to move off without accelerator in about 3L or 4L.
On inclines, you’ll be able (excepting for extreme load or incline) to get moving by selecting an appropriately low gear and while holding the brake pedal down slowly releasing the clutch until it begins to engage (until RPM drops to ~500), then release the brake and apply accelerator while slowly letting out the rest of the clutch to move off. 【版权】：
Fury6
【截图】：
声明：本人只是单纯搬运的，有问题，问也不懂，十分抱歉。
请文明回帖，如果嫌麻烦可以复制 “感谢楼主的分享”
但不可灌水，违者将有可能被封号。
【地址】：
回帖后才可看到本帖隐藏内容。VIP贵宾免回帖。
乱打内容会被封号。可粘贴一句“感谢楼主分享”
English
门户网
简简切换
