喜迎本站建立十七周年!2007/10/26一2024/10/26
 English
发新主题

[修改] 马力加大以及避震器改造v1.5 **Update**

马力加大以及避震器改造v1.5 **Update**


请大家试试看新的版本!

详情:http://bbs.18wos.org/viewthread.html?tid=91833&extra=page%3D1

Changelog:
v1.0: Initial Release
v1.1: Decreased cab pitch stiffness and increased front springing working point...
v1.2: Reduced brake torque, Increased cab pitch stiffness, cab pitch damping, increased cab roll stiffness and damping, Decreased front springing working point, decreased rear springing working point, increased rear damping speed... (Overall: Reduced chassis and cab roll and increased stability)
v1.3 Decreased cab pitch stiffness, increased cab pitch damping, increased cab pitch maximum forward angle, increased maximum cab pitch speed, reduced maximum cab roll speed, decreased cab roll stiffness, increased cab roll damping, increased front chassis damping speed and rear chassis damping speed (Overall: Increased maximum roll and pitch for cab, but these are quickly damped so that the cab does not continue oscillating excessively during driving)
v1.4 (Overall: Increased stiffness of chassis, greatly increased the damping of cab pitch, also decreased brake torque slightly)
v1.5 (Overall: (Based on opinions) Increased stiffness of chassis, increased damping of cab tilt and pitch, increased cab roll and pitch stiffness)
本帖最近评分记录
  • Lloyd Esq. 膜仔通汇 +3 2012-6-20 18:41 感謝分享

这个。。。又是全英文说明,看不懂,又改进了些什麽啊

1.5有改進自己會車陣的效果嗎

馬力加大以及避震器改造V1.5**更新**


請大家試試看新的版本!

詳情:http://bbs.18wos.org/viewthread.html?tid=91833&extra=page%3D1

日誌:
V1.0:初始發行
V1.1:增加減少駕駛室的俯仰剛度和前雨後春筍工作點...
V1.2:降低制動力矩,增加駕駛室俯仰剛度,減震駕駛室間距,側傾剛度和阻尼增加駕駛室,前雨後春筍般下降的工作點,下跌雨後春筍,阻尼增加速度後方工作點後面...... (總評:降低底盤和駕駛室輥和增加穩定性)
下降V1.3駕駛室的俯仰剛度,阻尼間距增加駕駛室,駕駛室增加最大正向俯仰角,俯仰駕駛室增加最大速度,最高時速降低輥駕駛室,駕駛室的側傾剛度下降,增加駕駛室輥阻尼,增加了機箱前部和後部底盤阻尼速度高速阻尼(總評:增加最大的軋輥和俯仰駕駛室,但這些快速衰減的太陽,駕駛室不繼續振盪在駕駛過程中過分)
V1.4(總評:底盤剛度增加,大大提高了駕駛室俯仰阻尼,即制動力矩略有下降)
V1.5(總評:(意見)的底盤剛度增加,出租車增加的傾斜和俯仰阻尼,滾動和俯仰剛度增加駕駛室)

下载下来试试看

 引用框:
原帖由 nfshp253 於 2012-6-20 16:43 發表
请大家试试看新的版本!

详情:http://bbs.18wos.org/viewthread.html?tid=91833&extra=page%3D1

Changelog:
v1.0: Initial Release
v1.1: Decreased cab pitch stiffness and increased front springing working poin ...
感謝再感謝辛苦了






歡迎到我家來看看^^      Taiwan Truck Simulator (TWTS)


更新,感谢分享。

式了V1.5版,似乎改善了磕头的毛病了,不知其他玩家的测式如何

回復 #樓主 的帖子


碰到物体时驾驶室狂点头的问题还是没有解决

回復 9樓# 的帖子


呵呵           .

辛苦你呀!!!!!!!!

支持下,辛苦了!只是不知覆盖在那个目录下?
发新主题