模载联合支援站
 English
发新主题
 69 12345
打印预览

[小车] 捷豹 Jaguar XJ (ATS 1.31百度)

SVIP

捷豹 Jaguar XJ (ATS 1.31百度)


【版本】:1.31x

                        
【介绍】:
 引用框:
一个转换版的旧捷豹XJ 2014从ETS 2。这款车现在符合其实际特点,快速加速至100公里/小时,最高时速约240公里/小时。模拟自动变速器,无换档,设定D型,你可以去(在舱内,也没有换挡旋钮,不)。后轮驱动。轴上的载荷是真实的,因此它的刹车很好,也是可控的。旧的糟糕的内部纹理已被替换为最高质量的(在图片中,甚至从远处看到)。模型制作良好,因此机器被分配游戏号,看门人在外面和里面工作。游戏物理不受影响,它是特制的与卡车一起使用的机器。时尚目录已经尽可能地从提到这是一条极好的道路,甚至它自己的相机在汽车的沙龙被认为是最好的。有一个小插孔,因为游戏的表面只显示在一边,司机的门穿过玻璃的洞出现在马路上。在肯沃思,安装的顺序是基本的,下载的档案被扔到文件夹中并在游戏菜单中激活。
複製內容到剪貼板
 原始碼:

A converted version of the old Jaguar XJ 2014 from ETS2. The car now corresponds to its real characteristics, rapid acceleration to 100 km / h and a top speed of about 240 km / h. Simulate the automatic transmission, no shifts, set mode D and you can go (in the cabin no shift knob, too, no). Rear drive. Load on the axes is real, therefore it brakes well, is controlled too. Old bad interior textures have been replaced with the highest quality ones (seen in the picture even from afar). The model is made soundly, therefore the machine is assigned game numbers, janitors working both outside and inside. The game physics is not affected, it is specially made to use the machine together with the trucks. The fashion directory has been cleared as much as possible from the mention that it was a superb road, even its own camera in the car's salon is attributed. There is a small jamb, due to the fact that in the game surfaces are displayed only on one side, the driver's door through the hole for the glass appears through the road.

Find in Kenworth, the order of installation is elementary, the downloaded archive is thrown into the folder and activated in the game menu.
【版权】:
Azorax Modding, adapted for ATS ETS3
                        
【截图】:


声明:本人只是单纯搬运的,有问题,问也不懂,十分抱歉。
      请文明回帖,如果嫌麻烦可以复制 “感谢楼主的分享”
      但不可灌水,违者将有可能被重罚、禁言、封号。灌前请三思!!!

                        
【地址】:


回帖后才可看到本帖隐藏内容。VIP贵宾免回帖。
乱打内容会被封号。可粘贴一句“感谢楼主分享”
本帖最近评分记录
  • volvo700 膜仔通汇 +5 2018-7-15 08:01 感谢分享



感谢楼主的分享

现在试试看!!!

谢谢分享

666666

感谢楼主的分享

谢谢分享~~~~~~

xxlz。。。。

谢谢分享!!

联合模拟

感谢楼主分享

感谢楼主的分享

感谢楼主的分享

不错


看看能用不啊

谢谢楼主
 69 12345
发新主题