模载联合支援站
 English
发新主题

[巴士] Scania Citywide GN14补丁

Scania Citywide GN14补丁


【介绍】:优化:IBIS,车声
增加:车内显示屏(站点信息)
好像送了一个ZF-6HP版本(应该不会跳车)
【版权】:作者Morphi
【图片】:即效果:http://v.youku.com/v_show/id_XMTU1MjU1MTI4MA==.html?from=y1.9-3.1
【下载地址】:
回帖后才可看到本帖隐藏内容。VIP贵宾免回帖。
乱打内容会被封号。可粘贴一句“感谢楼主分享”


[ 本帖最後由 WLQ 於 2017-2-3 18:40 編輯 ]
本帖最近评分记录
  • Lloyd Esq. 膜仔通汇 +3 2018-1-7 20:28 感谢分享

楼主回复 报站器


After starting the electrics you need to enter your ID and PIN code.
ID: 9691
PIN: 1805

楼主回复 启动方法


Startup
To start the bus you need to press "E" to increment the position of the key. Press "M" to decrement.
Position 0: Remove key
Position 1: Insert key / shut off electrics
Position 2: Start electrics / stop engine
Position 3: Ignition on
Position 4: Start engine, hold "E"
启动
要启动总线,您需要按“E”来增加键的位置。按“M”递减。
位置0:移除键
职位1:插入钥匙/关闭电器
职位2:电气/停止引擎启动
职位3:点火
位置4:启动发动机,保持“E”

楼主回复 注意


If the engine is on high idle speed due to cold temperature or activated by the high idle switch, start with caution. Due to the high RPM the torque converter is very strong on idle speed. It is recommended that you wait until the RPM reaches the normal state.
如果发动机因冷温或怠速开关启动高度怠速,应谨慎启动。由于高转速的转矩转换器是非常强劲的怠速。建议您等到RPM达到正常状态。
Door control
All three doors are manually controllable. The third door can be controlled automatically as well.
Third door manual: Door clearance switch, ( - ) key on the numpad
Third door automatic: 20h-switch, Roll-Key on the keyboard
门控制
所有三门手动控制。第三门也可以自动控制。
第三门手动门关开关,(-)键的小键盘
第三:20h门自动开关,在键盘上滚键

沙发

谢谢楼主

谢谢楼主

谢谢分享

看起来很不错哦

多拉快跑,争分夺秒!

谢谢分享

谢谢分享

谢谢分享!!!!!

好车我喜欢

感谢楼主分享

回帖看看。。。
发新主题