標題: [车头] DAF XF 105 by vad&k v6.10(百度下载) [打印本页]
作者: jianxun 時間: 2020-3-4 06:02 標題: DAF XF 105 by vad&k v6.10(百度下载)
【适用版本】:1.36.X 请自行测试版本
【介绍】:複製內容到剪貼板
原始碼:
– Completely redesigned EU interior. We added a lot of new parts and replaced the standard texture
– Redesigned external model.
– Advanced coupling supported.
– Support of all possible DLC on accessories and flags.
– Support for coloring – not complete. Coloring on the roof to go to is not entirely correct.
– A large number of tuning salon and exterior model
– Added some paint_job.
– Added several independent accessories in the cabin (requires the “DLC – Cabin Accessories”)
– Support the “DLC – DAF Tuning Pack” (requires the “DLC – DAF Tuning Pack”)
– Added several options for chassis and cabs.
– And other changes
Mod replaces the standard DAF XF105 of the game.
In mods, with the permission of the author, there are some materials from AlexeyP, Piva, Donovan and Vasily EVR.
Attention, before updating the mod, be sure to finish all the shipping and sell the old truck !!!
Attention, if you are using a mod for physics – in the mod manager, install the mod on physics BELOW addons DAF_XF_by_vadik_v.6.10 and Kraker/NTM_for_the DAF XF by vad&k !!!
Attention, if you use the adapted physics for the DAF XF105 mod from vad&k, do not forget to make changes to the configuration files that are in the defvehicletruckdaf.xfchassis and defvehicletruckdaf.xfcabin !!!
To activate the steering wheel animation 1800 degrees, go to the “/def/vehicle/truck/daf.xf/interior” folder and open the animations.sui file (for interiors with automatic transmission) or animations_m.sui (for interiors with manual transmission) in any text editor. Look for lines in this file that begin with the words “wheel_anim:”.
Place the characters “//” before the line ending with the words 900 degree.
And remove the “//” characters before the line ending with the words 1800 degree.
Report a problem, follow the changes in the mod, get help, etc. you can in my topic at the official forum of SCS Software:
https://forum.scssoft.com/viewtopic.php?f=35&t=223465
Changelog:
– holders of standard mirrors were redesigned and slots for lighting installation were added.
– in the addon “DLC – Cabin Accessories Daf XF 105 by vad&k” added several options for rear curtains (requires “DLC – Cabin Accessories”)
– fixed bugs and more.
The mod was tested on the version of patch 1.36 in DirectX mode, work on other versions is not guaranteed.
【版权】:複製內容到剪貼板
原始碼:
Credits: vad&k, SCS Software
Credits DAF_XF_by_vadik_50k_addons: 50keda
Credits airconditioning mod: Elitesquad Modz, vad&k
Credits Kraker/NTM for the DAF XF by vad&k: Kast, Nordisch, vad&k
Credits of on-board computer: piva
Keep authors links
Credits:
vad&k
【截图欣赏】:
【下载地址】:
回帖后才可看到本帖隐藏内容。VIP贵宾免回帖。
乱打内容会被封号。可粘贴一句“感谢楼主分享”
【友情提醒】:您的回复是我寻找MOD分享MOD最大的动力
圖片附件: DAF-XF-105.jpg (2020-3-4 06:02, 203.4 KB) / 該附件被下載次數 188
http://bbs.18wos.org/attachment.php?aid=433846
圖片附件: daf_xf_105_v6_10_by_vadik_for_ets2_v1_35_x_1_36_x_img1.jpg (2020-3-4 06:05, 89.56 KB) / 該附件被下載次數 192
http://bbs.18wos.org/attachment.php?aid=433847
圖片附件: daf_xf_105_v6_10_by_vadik_for_ets2_v1_35_x_1_36_x_img2.jpg (2020-3-4 06:05, 29.19 KB) / 該附件被下載次數 182
http://bbs.18wos.org/attachment.php?aid=433848
作者: KN22 時間: 2020-3-4 07:23
感谢楼主分享
作者: bing 時間: 2020-3-4 07:56
感谢楼主分享
作者: xf198935 時間: 2020-3-4 08:03
“感谢楼主分享”
作者: Lloyd Esq. 時間: 2020-3-4 08:31
已帮忙上传
作者: wsh12390 時間: 2020-3-4 08:45
感谢楼主分享
作者: amberdawn 時間: 2020-3-4 09:18
SCANIA有RJL 而DAF有vad&k 最顶级的存在!
作者: chen130 時間: 2020-3-4 09:52
感谢楼主分享
作者: CaA23187 時間: 2020-3-4 11:17
感谢楼主分享!
作者: hxghbtsj 時間: 2020-3-4 11:22
感谢楼主分享
作者: 柠檬小迷妹 時間: 2020-3-4 11:47
感谢楼主分享
作者: zzlzhwy 時間: 2020-3-4 12:05
感谢楼主分享
作者: 13881823163 時間: 2020-3-4 12:57
感谢楼主分享
作者: 13401317214 時間: 2020-3-4 13:20 標題: 感谢楼主分享
``````谢谢
作者: 无曲清唱 時間: 2020-3-4 13:28
有我,
你的生活更多财! 引用框:
原帖由 KN22 于 2020-3-4 07:23 发表
感谢楼主分享
作者: 帅男孩@_@ 時間: 2020-3-4 13:48
感謝樓主分享
作者: cq245798856 時間: 2020-3-4 14:09
感谢楼主分享
作者: hh279956458 時間: 2020-3-4 15:08
感谢楼主分享
作者: hh279956458 時間: 2020-3-4 15:08
感谢楼主分享
作者: Bluesky428 時間: 2020-3-4 15:46
感謝樓主分享
作者: 心之所向 時間: 2020-3-4 15:49
感谢楼主分享
作者: SINO7078 時間: 2020-3-4 16:20
感谢楼主分享
作者: 2377786841 時間: 2020-3-4 17:18
感谢楼主分享
作者: hzsz1374 時間: 2020-3-4 18:00
感谢分享
作者: gaofeng19760423 時間: 2020-3-4 18:05 標題: 回復 #先導車 的帖子
谢谢楼主谢谢
作者: zjx37 時間: 2020-3-4 18:20
感谢楼主分享
作者: cadillac 時間: 2020-3-4 19:12
感谢楼主分享!
作者: ILHS 時間: 2020-3-4 20:02
感謝樓主分享
作者: GTS模拟 時間: 2020-3-4 20:03
感谢分享谢谢
作者: 逝锦轮回 時間: 2020-3-4 20:05
感谢楼主分享”
作者: ok376082597 時間: 2020-3-4 20:31
不错的很不错的很
作者: lxo1175810045 時間: 2020-3-4 20:38
感谢分享!
作者: samcool 時間: 2020-3-4 22:53
感谢楼主分享
作者: samcool 時間: 2020-3-4 22:55
感谢楼主分享
作者: TianMing12138 時間: 2020-3-4 22:57
感谢楼主分享
作者: bcfbcbv123 時間: 2020-3-5 01:02
谢谢楼主分享!!!
作者: 百荣 時間: 2020-3-5 08:29
老板大气
作者: 461313 時間: 2020-3-5 08:30
感谢楼主分享
作者: 涂山红红 時間: 2020-3-5 10:47
感谢楼主分享
作者: 开车拉货 時間: 2020-3-5 11:39
感谢楼主分享
作者: cheng119 時間: 2020-3-5 15:20
感谢楼主分享
作者: ladenjoe 時間: 2020-3-5 16:05
感谢楼主分享
作者: 记忆沙滩 時間: 2020-3-5 18:24
感谢楼主分享
作者: 554 時間: 2020-3-5 18:49
谢谢楼主分享
作者: dsy531 時間: 2020-3-6 08:47
感谢楼主分享
作者: wangtaishuai 時間: 2020-3-6 09:23
感谢分享
作者: wj10086 時間: 2020-3-6 12:56
感谢楼主分享
作者: 萌新 時間: 2020-3-6 13:55
感谢楼主分享
作者: 豪沃A7彩绘 時間: 2020-3-6 17:19
感谢分相互
作者: 56620241 時間: 2020-3-6 18:07
感谢楼主分享
作者: 2862877432 時間: 2020-3-6 20:10
感谢楼主分享
作者: 13639151188 時間: 2020-3-6 21:03
谢谢分享
作者: 199999 時間: 2020-3-7 10:05
感谢楼主分享
作者: n1246038929 時間: 2020-3-7 11:37
感谢楼主分享
作者: dl141 時間: 2020-3-7 13:36
感谢楼主分享
作者: legendarysu 時間: 2020-3-7 16:47
“感谢楼主分享”
作者: Payton 時間: 2020-3-8 11:54
感谢楼主分享
作者: xu1551 時間: 2020-3-8 14:09 標題: 回復 #先導車 的帖子
呵呵哈哈哈哈哈哈哈哈哈哈哈哈
作者: 942 時間: 2020-3-9 10:49
谢谢
作者: Louis_Long 時間: 2020-3-9 15:00
感谢感谢!!
作者: loveben120 時間: 2020-3-9 22:56
感谢楼主分享
作者: 204088039 時間: 2020-3-10 12:37
感谢楼主分享
作者: 18822183550 時間: 2020-3-10 17:23
感谢楼主分享
作者: ttcc518 時間: 2020-3-10 19:04 標題: 感谢分享
感谢楼主分享
作者: hoyuen 時間: 2020-3-11 08:34
感謝樓主分享
作者: fancheyu 時間: 2020-3-11 13:16
感谢楼主分享
作者: CQA 時間: 2020-3-11 14:18
感谢LZ分享
作者: 极速力 時間: 2020-3-11 20:31
感谢楼主分享
作者: alfaromeo8413 時間: 2020-3-12 01:33
感谢楼主分享
作者: 十邪散魂 時間: 2020-3-12 22:17
感谢楼主分享
作者: kevinphcheong 時間: 2020-3-12 23:10
感谢楼主分享
作者: 731751740 時間: 2020-3-13 13:28
感谢楼主分享
作者: tantantans 時間: 2020-3-13 18:15
感谢分享支持支持
作者: czylifestyle 時間: 2020-3-14 17:40
谢谢楼主分享
作者: wasdno 時間: 2020-3-14 18:05 標題: 感谢楼主分享
作者: zjm794712354 時間: 2020-3-16 10:52
感谢楼主分享
作者: panxuetao 時間: 2020-3-16 15:39 標題: 回復 #先導車 的帖子
感谢楼主分享
作者: aniunn 時間: 2020-3-16 16:58
感谢楼主分享
作者: lyin 時間: 2020-3-16 18:56
感谢楼主分享
作者: 爱车小王子 時間: 2020-3-16 20:35 標題: 回復 #先導車 的帖子
感谢楼主分享
作者: kevin_wang1979 時間: 2020-3-17 20:46
感谢楼主分享~~
作者: 18208142204 時間: 2020-3-21 13:03
感谢楼主分享
作者: zhs1995625 時間: 2020-3-22 17:51
感谢楼主分享
作者: gupenghong 時間: 2020-3-23 08:24
感谢楼主分享
作者: hwqs 時間: 2020-3-26 21:59
THNX
作者: 我是广州人 時間: 2020-3-28 13:12
谢谢分享
作者: 13737292796 時間: 2020-3-28 22:51
感谢楼主分享
作者: wamsr 時間: 2020-3-30 16:48
感谢楼主分享
作者: capshit 時間: 2020-4-17 01:57
感谢分享
作者: 15871717205 時間: 2020-4-20 17:51 標題: 感谢楼主分享
感谢楼主分享 感谢楼主分享
作者: yrz040909 時間: 2020-5-29 22:35
“感谢楼主分享”
作者: 让大哥v 時間: 2020-5-30 23:18
FromUriOpen@bilibili://YXY0NTU3NTk0MzU/YWJ0ZXN0PUUmdHM9MTU5MDg1MTQ0MiZleHBpZD04MjImdXVpZD04RkMyMTYxNC01Mjc3LTA5RTMtNzBEOC1FODNGRjYxOTkyNUU3MTQwOWluZm9jJmJzb3VyY2U9YmRib3g=
作者: 让大哥v 時間: 2020-5-30 23:22
FromUriOpen@bilibili://YXY0NTU3NTk0MzU/YWJ0ZXN0PUUmdHM9MTU5MDg1MTQ0MiZleHBpZD04MjImdXVpZD04RkMyMTYxNC01Mjc3LTA5RTMtNzBEOC1FODNGRjYxOTkyNUU3MTQwOWluZm9jJmJzb3VyY2U9YmRib3g=
作者: czczcz102 時間: 2020-10-31 21:10
谢谢楼主分享
作者: dxfcsj 時間: 2021-5-4 18:10
感谢楼主分享
模载联合支援站 |
http://bbs.18wos.org/ |