模载联合支援站

複製內容到剪貼板
原始碼:

Changes v5.0.4:

- Increased driver seat's air suspension sensitivity slightly to better simulate real life's seat.

- Added compatibility for Renault Range T (Polatli's mod, Not RTA's)



From one of the most experienced physics modders, modder of Physics 1, 2, 3, 4 and now the pride and the ultimate Physics 5, taking ETS2 to another level of realism.

This is a completly new physics mod built from scratch, not a rework of my previous released mods. This mod contains totally new and different formula from the previous ones.

COMPATIBILITY

- Made from game patch 1.28 - fully compatible.

- Fully compatible with all original SCS trucks.

- Fully compatible with RJL Scania.

- Fully compatible with Maz 5440 A8 (Do not use with the tent)

- Fully compatible with Polatli's Renault Range T (Not RTA's mod, please don't confuse make sure it's Polatli's Renault)

- NOT compatible with any other physics mod.

- NOT compatible with any other mod that deals with truck weight, chassis, seat, suspension, steering, brake.

- NOT compatible with any other modded trucks. (will add Big Stars, Madster, Ohana in future updates)

--------------------------------------------------------------------

USER INSTRUCTIONS

- Give this mod TOP priority above all other mods.

- Enable "Physics Camera" and slide its bar to max.

- "Trailer Stability" set to min.

- You may need to test to re-adjust the steering sensitivity/non linearity depending on your controller.

- For 900 degree wheels, 0% sensitivity and 0 - 5% non-linearity.

- For 270 degree wheels, 50% sensitivity and 100% non-linearity.

- "Braking intensity" recommended at 15 - 30% for Logitech Steering Wheels.

- For users who use a keyboard or joypad to steer, you may need to test and re-adjust the scale.

OPTIONAL SET UP

If you want to experience even smoother and less twitchy steering, do the following:

1. Find a file named "Control.txt" in your profile folder (My document > Euro Truck > Profile). And copy it to a safe place just in case. If you don't like the change you can take the old file back.

2. Open the file, find a line that says :

"mix steering `dsteering - (pow(normalize(abs(sel(c_jisteer, -j_steer?0, j_steer?0)), c_steer_dz), (1.0 + c_steer_func * 0.5)) * sign(sel(c_jisteer, -j_steer?0, j_steer?0)))`"

3. Replace that line with the following line:

"mix steering `dsteering - (0.58 * normalize(abs(j_steer?0), c_steer_dz) + (0.42 * (c_steer_func / 2)) * pow(normalize(abs(j_steer?0), c_steer_dz), 4)) * sign(sel(c_jisteer, -j_steer?0, j_steer?0))`"

4. Save the file. And run the game normally.

5. Set the "non-linearity" 100% "sensitivity" 0% and adjust from there to suit you.

6. It's done. Drive and see if you like the new steering.

This formula makes your steering wheel act like a 1080 degree wheel (real life truck). This formula works best with 900 degree wheels like G25/G27/G29.