English
發新話題
 18 12
打印

[车头] OHAHA FH16 17.5S(百度下载)

OHAHA FH16 17.5S(百度下载)


我看也没人转,我就帮忙转过来吧= =
介绍:
New chassis variants新的东西
8x4A
8x4B
6×2 with lifted axle (mid and rear)6x2中提升桥后提
6×2 Tandem (compatible* with Flemming V’s tandem trailers)看不懂
-All chassis (except tandem) versions support adding side skirts and exhausts
-The default truck, in 4×2, 6×2, 6×4 and 8x4A variants, comes without any rear wheel arches (fenders) – these are now optional accessory, in plastic or painted versions.
-Reworked cabin to accept glass panel on the side.
-Reworked frames and suspensions
-Reworked headlights
-Improved reflection of projectors
-Added black background for FH16
-Several variants, including high and low beam in the lower bumper projectors
-Yellow glass fog lights.
-Reworked taillights – LED’s for parking light
-Engine lower and upper grids in plastic, paint and mirror – chrome finish, available as an option. Starting with 17.4s, the grids are actual 3D meshes.
-Painted wipers’ base.
-Painted panel above windshield (forehead)
-New type of projectors available on the forehead
-Added LKW-Schilds (L, G, V, TIR signs) on the upper engine grid
-Added accessory group to lower engine grid (you can add small lights, to various locations, including turn signals)
-Added custom decal on the forehead (you can change it by editing decals_ohaha.dds)
-Added accessory group to the back of Globetrotter cabins, with various safety signs and speed limits (50, 70, 80, 90 etc.) and allowing the addition or removal of spoilers, aerodynamic hoods and painted variant of air intake duct, for all cabin versions.
-Added accessory group to the rim of the Globetrotter XL cabin, enabling you to add custom lights
-Added accessory group to the back of Globetrotter cabins, for three types of custom lights (park, brake, reverse).
-Custom mirrors with markers to add small lights, including turn signals.
-Two new roof bars – one for Sleeper cabin (a rework of a default SCS beacon) and one for Globetrotter XL (similar to original Volvo RoofBar)
-A few custom paint-jobs
-Starting with v12.5s the front engine grids are disconnected from the engine type. You can switch them in truck shop. Just look for a marker called C_EQUIP (somewhere on the floor level, behind the cab, visible from front and sides).
-Starting with 13.1s the default SCS chrome finish is also available (thank thebigbadonion)
-A few custom vertical exhaust pipes.
-Rear fenders / mudflaps as accessories in truck shop.
-Ability to add custom rear bumpers.
-Bonus: Paint-job DLC’s skins available – separate mod at the same link.
-Painted and chromed headlight “brows” (GT-Mike better be happy now).
-High-bar roof grills for Globetrotter cabins.
-Auxiliary fuel tanks available as option, for 8×4 chassis (only visual – same overall fuel capacity).
-New accessories (side windows, wind deflectors, painted stock sun-shield, painted side and front mirrors).
-Windshield and side windows decals.
-Front and rear mud flaps, in three colors.
-Two additional engines based on real Volvo range – D16K550 (2800Nm) and D16K650 (3150Nm).
-Hazardous materials transport signs for front upper engine grid.
-Crane covers and crane accessory (Palfinger inspired) for 8x4a chassis.
.
Known issues
– choosing the glass panel on the sides of the cab and windshield decals does not change the interior (if you want to see that, there is a separate, custom interior mod, in the same place, but it’s not yet fully developed)
– some of the accessories might produce a visible collision with other parts. it’s up to the user to choose their correct combination
– you should always visit the Truck Shop and switch to the 4×2 chassis, then remove all custom accessories, before enabling a new version of the mod. after this simply go back and install them again.
算了= =谁愿意翻译帮我下吧,,,
版本:1.15 1.16
版权:OHAHA,ETS2.LT
截图:附件
下载地址:
http://pan.baidu.com/s/1CTAN0 密码:jsi5
我就不设置回复可见了,还麻烦,还要凑字数等等,,,,,,

[ 本帖最後由 18802417352 於 2015-1-30 09:49 編輯 ]
本帖最近評分記錄
  • ww896358 膜仔通汇 +3 2015-1-30 10:06 感谢分享

Bilibili:https://space.bilibili.com/65349488/
优酷:http://i.youku.com/ganbuu/

.
本帖最近評分記錄
  • ww896358 膜仔通汇 -2 2015-1-30 10:05 违反站规:扰乱交流秩序

新发的帖子!不下载也支持一下。

新发的帖子!不下载也支持一下。

这个只是皮肤吗?

前四后八

虽然不需要回复 ,但是还是回复一下!

  正在找這台

这是翻译过来的
新底盘变体新的东西
8 x4a
8 x4b
与取消6×2轴(中期和后)6 x2中提升桥后提
6×2串联(兼容*弗莱明V的串联预告片)看不懂
——底盘(串联除外)版本支持添加侧裙和尾气
——默认的卡车,在4×2、6×2、6×4和8 x4a变体,是没有任何后轮拱(挡泥板)——这些现在可选的配件,在塑料或画的版本。
修改了小屋接受玻璃面板。
修改了框架和悬架
修改了车头灯
改善反射的 影仪
——带来FH16黑色背景
几个变种,包括高和低梁降低保险杠 影仪
黄色的雾玻璃灯。
修改了尾灯——领导的停车灯
发动机上下网格在塑料、油漆和镜子镀铬,可以作为一个选项。 从17.4开始,实际3 d网格网格。
涂刮水器的基础。
上面画面板挡风玻璃(额)
以及其他类型的可用 影仪的额头
——带来LKW-Schilds(L,G,V,公路运输标志)上引擎网格
——带来配件组降低引擎网格(您可以添加小灯,到不同的地方,包括方向灯)
——带来定制贴花的额头(您可以通过编辑decals_ohaha.dds)改变它
——带来附件集团环球旅行者小屋,与各种安全标志和限速(70、70、80等),并允许添加或删除的破坏者,气动抽油烟机和画的变体空气进气装置,机舱版本。
——带来配件组的边缘世界观光旅行家XL小屋,使您能够添加自定义灯
——带来附件集团环球旅行者小屋,三种类型的定制灯(公园、制动、反向)。
自定义标记添加小灯镜,包括信号。
两名新屋顶酒吧——一个卧铺包间(默认SCS信标的返工),一个用于世界观光旅行家XL(类似于原始沃尔沃RoofBar)
——一些定制的彩绘
——依次经历v12.5s前面引擎电网断开发动机类型。 在卡车商店你可以切换。 只是寻找一个标志称为C_EQUIP(某处在地板上水平,在出租车后面,前面和侧面可见)。
——依次经历13.1秒默认SCS镀铬也可以(感谢thebigbadonion)
——一些自定义垂直排气管。
后挡泥板/挡泥垂布在卡车配件商店。
能力添加定制的后保险杠。
奖金:油漆DLC的皮肤可用-单独的国防部在同一链接。
画和镀铬的大灯“眉毛”(现在GT-Mike更好的快乐)。
单杠世界观光旅行家小屋的屋顶烤架。
辅助油箱可用选项,8×4底盘(只有视觉-整体燃料容量相同)。
——附件(一面窗户,风导向板,画股票的遮阳板,画一面镜子前面)。
挡风玻璃和侧窗口贴花。
前面和后方挡泥板,在三种颜色。
两个额外的引擎基于真实沃尔沃范围——D16K550(2800 nm)和D16K650(3150海里)。
危险材料运输标志前面上层引擎网格。
起重机和起重机配件(Palfinger启发)8 x4a底盘。

已知的问题
——选择玻璃面板的出租车和挡风玻璃贴花不改变内部(如果你想看到,有一个单独的,自定义内部国防部,在同一个地方,但尚未充分发展)
——一些配件可能产生一个可见的碰撞与其他部分。 由用户选择自己正确的组合
——你应该访问卡车商店和切换到4×2底盘,然后删除所有自定义配件,启用一个新版本的mod.这就回去后,再重新安装。

怎麼1.16   買完會掉線....

6×2串联(兼容*弗莱明V的串联预告片)
  ——底盘(串联除外)版本支持添加侧裙和尾气
  ——默认的卡车,在4×2、6×2、6×4和8 x4a变体,是没有任何后轮拱(挡泥板)——这些现在可选的配件,在塑料或画的版本。
  修改了小屋接受玻璃面板。
  修改了框架和悬架
  修改了车头灯

这个不错,下载来试试

好东西顶了啊支持你

虽然我很想说不错,但是链接失效了,文件被删除

谢谢分享
 18 12
發新話題